Max-Pic kit

Max-Pic kit (In stock now)

The last Max-Pic is one very powerful universal PIC trainer board for every firmware and work at 12Mhz!

Max-Pic SPEC:

* Use PIC18F2455/2550 MCU chip
* Come with HID BTL, can upgrade via USB port directly
* Come with the 8pin FPC port, can program any firmware to PIC chip via our FPC programmer
* Come with one standard 6pin ICSP port, can program by any programmer that build in standard ICSP port
* Come with one RESET/BTL combo button, can use for reset the PIC or enter BTL mode for upgrade
* Come with 28pin testing pin, very easy to link to the PIC chip every pin and test
* Come with 24 pin selector array, can set almost PIC pin to LED status or pull down to GND
* Come with 19 LEDs display array, can show these pins working status
* Come with the last "F0" LED demo legit firmware

The Max-Pic looking:


The Max-Pic backside looking:


How to insert the FPC cable to the FPC port
 

If without this yellow sticker , then mean it's not a official product.


The Max-Pic come with the "F0" LED demo firmware when selling, so it's legit product.
When you get this kit first time, you should put it to USB port directly, to see it works or not.
The LED demo flow:
[1] first all LEDs will turn on and keep 2 seconds around.


[2] then all LEDs will turn off, and start to blinking one by one, and loop.





Now you can try to enter the BTL upgrade mode, just press the RED RESET/BTL button, you should see the RB4 and RB5 blinking very fast,
and PC can detect one "HID compliant device", now is in the BTL mode already, the firmware updater should can detect your kit also.



The retail packing:

what's come with the packing box:
* Max-Pic kit x1
* 8Pin upgrade FPC x1